User Manual - Page 185

For 2011 3008 HYBRID 4.

Loading ...
Loading ...
Loading ...
PRACTICAL INFORMATION
1
83
12 V BATTERY
Procedure for charging your battery
when it is at or for starting the engine
using another battery.
Your vehicle is tted with a conventional
12 V battery, located under the bonnet,
in addition to the high voltage battery
used by the hybrid system.
In certain conditions, if the 12 V battery
is too discharged to activate the hybrid
system, recharging from another con-
ventional 12 V battery is possible.
Do not carry out this recharge if the
Ready lamp is on.
Access to the battery
The battery is located under the bonnet.
To gain access to it:
) open the bonnet using the interior
release lever, then the exterior safety
catch,
) secure the bonnet stay,
) remove the plastic cover to gain ac-
cess to the two terminals,
) unclip the fusebox to remove the
battery, if necessary.
Disconnecting the cables
) Raise the locking tab fully.
Reconnecting the cables
) Position the open clip 1 of the cable
on the positive terminal (+) of the
battery.
) Press vertically on the clip 1 to posi-
tion it correctly against the battery.
) Lock the clip by spreading the po-
sitioning lug and then lowering the
tab 2 .
Do not force the tab as locking
will not be possible if the clip is
not positioned correctly; start
the procedure again.
Before doing any work on your
vehicle, switch off the ignition
( Ready lamp off) to avoid any
risk of injury resulting from automatic
operation of the motor.
Loading ...
Loading ...
Loading ...