User Manual - Page 140

For 2011 3008 HYBRID 4.

Loading ...
Loading ...
Loading ...
1
38
A
utomat
i
c app
li
cat
i
on,
e
n
g
ine off
With the vehicle stationary, the parking
brake is automatically applied when
the engine is switched off.
-
illumination of the braking
warning lamp and of the warn-
ing lamp P in control lever A ,
A
utomat
i
c re
l
ease
The electric parking brake releases au-
tomatically and progressively when
you press the accelerator:
) Put the gear lever in position A , M
or R then press on the accelerator
pedal.
Before leaving the vehicle,
check that parking brake
warning lamp in the instru-
ment panel is on xed (not
ashing).
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
- extinction of braking warn-
ing lamp and of the warning
lamp P in control lever A ,
The noise of operation con rms the ap-
plication/release of the electric parking
brake.
Full release of the parking brake is con-
rmed by:
T
o
i
mmo
bili
se t
h
e ve
hi
c
l
e,
e
n
gi
ne runn
i
n
g
With the engine running and the vehicle
stationary, in order to immobilise the
vehicle it is essential to manually apply
the parking brake by pulling on control
lever A .
The application of the parking brake is
con rmed by:
-
illumination of the braking warn-
ing lamp and of the warning
lamp P in control lever A ,
When the driver’s door is opened, there
is an audible signal and a message is
displayed if the parking brake has not
been applied, unless the gear lever is in
position P (Park).
Before leaving the vehicle,
check that parking brake
warning lamp in the instrument
panel is on xed, not ashing.
When stationary, with the en-
gine running, do not press the
accelerator pedal unneces-
sarily, as you may release the
parking brake.
Application of the parking brake is con-
rmed by:
- display of the message
"Handbrake on".
In the case of towing, a loaded vehi-
cle or parking on a gradient, turn the
front wheels towards the pavement
and engage a gear when you park.
- display of the message
"Handbrake off".
- display of the message
"Handbrake on".
Loading ...
Loading ...
Loading ...