Loading ...
Loading ...
Loading ...
PRACTICAL INFORMATION
1
88
RECOVERING THE VEHICLE ON
A
F
L
AT
-
BED
Access to the tools From the front
) On the front bumper, unclip the cover
by pressing at the bottom.
) Screw the towing eye in fully.
) On the rear bumper, unclip the cover
by pressing at the bottom.
) Screw the towing eye in fully.
) Switch on the hazard warning lamps
on the recovered vehicle.
From the rear
The towing eye is installed in the boot
under the fl oor. The towing eye is used
only to pull the vehicle onto the recovery
vehicle, not for towing the vehicle.
To gain access to it:
) open the boot,
) raise the fl oor,
)
remove the towing eye from the holder.
Always recover the vehicle
on a fl at bed lorry or trailer.
Never tow the vehicle with the
four wheels on the ground (or the
front or rear wheels only), you risk
damaging the transmission.
Place the gear lever in position N and
switch off the engine ( Ready lamp off).
Procedure for having your vehicle re-
covered on a fl at bed lorry or trailer.
Loading ...
Loading ...
Loading ...