Loading ...
Loading ...
Loading ...
PRACTICAL INFORMATION
1
8
4
Charging the battery using a
battery charger
) Disconnect the battery from the ve-
hicle.
) Follow the instructions for use pro-
vided by the manufacturer of the
charger.
) Reconnect starting with the nega-
tive terminal (-).
) Check that the terminals and con-
nectors are clean. If they are cov-
ered with sulphate (whitish or
greenish deposit), remove them and
clean them.
Starting using another battery
) Connect the red cable to the posi-
tive terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
) Connect one end of the green or black
cable to the negative terminal (-) of the
slave battery B .
) Connect the other end of the green
or black cable to the earth point C
on your vehicle (engine mounting).
) Operate the starter, let the engine run.
) Wait until the engine returns to idle
and disconnect the cables.
Do not attempt to charge the
high voltage battery.
Loading ...
Loading ...
Loading ...