Loading ...
Loading ...
Loading ...
1
51
Di
sp
l
a
y
s
i
n t
h
e
i
nstrument pane
l
Gear lever positions
N. Neutral
R. Reverse
1, 2, 3, 4, 5, 6. Gears in sequential mode
AUTO. This comes on when the au-
tomatic mode is selected. It
switches off on changing to se-
quential mode.
Movin
g
off
)
Place your foot on the brake
when this warning lamp fl ashes
(e.g.: when starting the engine).
) Select position N .
N appears in the instrument panel
screen.
) Press the brake pedal down fully.
) Select fi rst gear (position M or A ) or
reverse (position R ).
) Take your foot off the brake pedal,
then accelerate.
) Release the parking brake unless it
is programmed to automatic mode.
AUTO or R appears in the in-
strument panel screen.
N fl ashes in the instrument
panel, accompanied by an au-
dible signal and a message in
the multifunction screen, if the gear
lever is not in position N on starting.
Foot on brake fl ashes in the instru-
ment panel, accompanied by an au-
dible signal and a message in the
multifunction screen, if the brake
pedal is not pressed on starting.
There is an audible signal
when reverse gear is en-
gaged.
) Start the engine.
Sequential mode
) When the vehicle has moved off,
select position M to change to
sequential mode.
AUTO disappears and the
gears engaged appear in
succession in the instrument
panel screen.
The gear change requests are only car-
ried out if the engine speed permits.
It is not necessary to release the accel-
erator during gear changes.
When braking or slowing down, the
gearbox changes down automatically to
permit reacceleration of the vehicle in
the correct gear.
At very low speed, if reverse
gear is requested, this will only
be taken into account when
the vehicle is immobilised. The Foot
on brake warning lamp may fl ash on
the instrument panel to prompt you
to brake.
At high speed, if reverse gear is re-
quested, the N indicator lamp will
fl ash and the gearbox will change to
neutral automatically. To engage a
gear again, return the lever to posi-
tion A or M .
If you leave the vehicle, place
the lever in position N and you
must switch off the engine
( Ready lamp off).
Loading ...
Loading ...
Loading ...