Loading ...
Loading ...
Loading ...
PRACTICAL INFORMATION
17
2
Changing dipped/main beam
headlamp bulbs
) Remove the protective plastic cover
by pulling on the tab.
) Disconnect the bulb connector.
) Turn the bulb holder.
) Pull out the bulb and change it.
To re fi t, carry out these operations in re-
verse order.
CHANGING A BULB
1. Direction indicators
(PY21W-21W).
2. Dipped/main beam headlamps
(H9-12V-65W).
3. Sidelamps/daytime running
lamps (light emitting
diodes - LEDs).
4. Foglamps (PS24-24W).
The headlamps are fi tted with
polycarbonate glass with a
protective coating:
) do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
) use a sponge and soapy water,
) when using a high pressure
washer on persistent marks, do
not direct at the lamps or their
outlines for too long, so as not to
damage their protective coating
and seals.
Front lamps
) Do not touch the bulb directly with
your fi ngers, use lint-free cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk of
serious burns).
It is imperative to use only anti-ultra-
violet (UV) type bulbs in order not to
damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
Changing the light emitting
diode-LED lamps
For replacement, contact a PEUGEOT
dealer or qualifi ed workshop.
Before doing any work on your
vehicle, switch off the ignition
( Ready lamp off) to avoid any
risk of injury resulting from automatic
operation of the motor.
Loading ...
Loading ...
Loading ...