Loading ...
Loading ...
Loading ...
96 GETTING TO KNOW YOUR INSTRUMENT PANEL
Tow Mode Indicator Light
This light will turn on when Tow Mode
is active.
Track Mode Indicator Light
This light will turn on when Track
Mode is active.
Turn Signal Indicator Lights
When the left or right turn signal is
activated, the turn signal indicator will
flash independently and the
corresponding exterior turn signal
lamps will flash. Turn signals can be activated
when the multifunction lever is moved down
(left) or up (right).
NOTE:
A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.
WHITE INDICATOR LIGHTS
Adaptive Cruise Control (ACC) Ready Light
— If Equipped
This light will turn on when the vehicle
equipped with ACC has been turned
on, but not set Ú page 124.
Cruise Control Ready Indicator Light
This light will turn on when the cruise
control has been turned on, but not
set Ú page 122.
Hill Descent Control (HDC) Indicator Light
— If Equipped
This indicator shows when the HDC
feature is turned on. The lamp will be
on solid when HDC is armed. HDC can
only be armed when the transfer case
is in the 4WD LOW position and the vehicle
speed is less then 30 mph (48 km/h). If these
conditions are not met while attempting to use
the HDC feature, the HDC indicator light will
flash on/off.
LaneSense Indicator Light — If Equipped
When the LaneSense system is ON,
but not armed, the LaneSense
indicator light illuminates solid white.
This occurs when only left, right, or
neither lane line has been detected. If a single
lane line is detected, the system is ready to
provide only visual warnings if an unintentional
lane departure occurs on the detected lane line
Ú page 144.
Selec-Speed Control Indicator Light — If
Equipped
This light will turn on when
“Selec-Speed Control” is activated.
To activate “Selec-Speed Control”, assure the
vehicle is Four Wheel Drive Low (4WD) and push
the button on the Instrument Panel.
NOTE:
If the vehicle is not in 4WD Low, “To Enter
Selec-Speed Shift to 4WD Low” will appear in
the instrument cluster display.
21_WK_OM_EN_USC_t.book Page 96
Loading ...
Loading ...
Loading ...