Loading ...
Loading ...
Loading ...
122 STARTING AND OPERATING
Battery voltage drops too low.
Stop/Start OFF switch is pushed.
Stop/Start related system malfunction.
4WD system is put into 4WD LOW mode.
TO MANUALLY TURN OFF THE STOP/
S
TART SYSTEM
Stop/Start OFF Switch
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will
illuminate. The “Stop/Start OFF” message will
appear in instrument cluster display within the
Stop/Start section, and the autostop function
will be disabled Ú page 81.
NOTE:
The Stop/Start system will reset itself back to
an ON condition every time the ignition is turned
OFF and back ON.
TO MANUALLY TURN ON THE STOP/
S
TART SYSTEM
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will turn
off.
SYSTEM MALFUNCTION
If there is a malfunction in the Stop/Start
system, the system will not shut down the
engine. A “SERVICE STOP/START SYSTEM”
message will appear in the instrument cluster
display Ú page 88.
If the “SERVICE STOP/START SYSTEM”
message appears in the instrument cluster
display, have the system checked by an
authorized dealer.
If a malfunction occurs during an autostop, the
vehicle may not auto start and will need a key
start.
CRUISE CONTROL SYSTEMS — IF EQUIPPED
The Cruise Control system has two control
modes that function differently. Always confirm
which mode is selected:
Cruise Control mode for cruising at a
constant preset speed.
Adaptive Cruise Control mode for main-
taining an appropriate distance between
vehicles.
NOTE:
Cruise Control will not detect vehicles directly
ahead of you. Always be aware of the mode
selected.
CRUISE CONTROL — IF EQUIPPED
When engaged, the Cruise Control takes over
accelerator operations at speeds greater than
20 mph (32 km/h).
The Cruise Control buttons are located on the
right side of the steering wheel.
21_WK_OM_EN_USC_t.book Page 122
Loading ...
Loading ...
Loading ...