Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 159
TOWING TIPS
Before towing, practice turning, stopping, and
backing up the trailer in an area located away
from heavy traffic.
Automatic Transmission
Select the DRIVE (D) range when towing. The
transmission controls include a drive strategy to
avoid frequent shifting when towing. However, if
frequent shifting does occur while in DRIVE,
select TOW mode (if equipped), or use the
AutoStick shift control to manually select a
lower gear.
NOTE:
Using TOW mode (if equipped), or selecting a
lower gear (using the AutoStick shift control)
while operating the vehicle under heavy loading
conditions, will improve performance and
extend transmission life by reducing excessive
shifting and heat buildup. This action will also
provide better engine braking.
AutoStick
When using the AutoStick shift control, select
the highest gear that allows for adequate
performance and avoids frequent down-
shifts. For example, choose “5” if the desired
speed can be maintained. Choose “4” or “3”
if needed to maintain the desired speed.
To prevent excess heat generation, avoid
continuous driving at high RPM. Reduce
vehicle speed as necessary to avoid
extended driving at high RPM. Return to a
higher gear or vehicle speed when grade and
road conditions allow.
Cruise Control — If Equipped
Do not use on hilly terrain or with heavy
loads.
When using the Cruise Control, if you experi-
ence speed drops greater than 10 mph
(16 km/h), disengage until you can get back
to cruising speed.
Use Cruise Control in flat terrain and with
light loads to maximize fuel efficiency.
4
21_WK_OM_EN_USC_t.book Page 159
Loading ...
Loading ...
Loading ...