Loading ...
Loading ...
Loading ...
316 IN CASE OF EMERGENCY
NOTE:
The jack must be placed straight on with handle
facing outwards. See the following Front Jacking
Location images for reference. The position of
the front jack is the same for all trim levels.
Front Jacking Location
Front Jacking Location - Rock Rail
5. For a rear tire, place the jack in the slot on
the rear tie-down bracket, just forward of
the rear tire (as indicated by the triangular
lift point symbol on the sill molding). Do not
raise the vehicle until you are sure the jack
is fully engaged.
NOTE:
The rear lifting point location is the same for all
trim levels.
Rear Lifting Point
Rear Lifting Point - Rock Rail
Rear Jacking Location
CAUTION!
Do NOT raise the vehicle by the body side sill
molding. Be sure the jack is placed in the
proper engagement location on the inside of
the panel. Damage of the vehicle may occur if
the procedure is not properly followed.
21_WK_OM_EN_USC_t.book Page 316
Loading ...
Loading ...
Loading ...