Loading ...
Loading ...
Loading ...
118 STARTING AND OPERATING
indicators are flashing on the "DOWN" button
the lowest solid indicator lamp is the position
the system is working to achieve.
Pushing the “UP” button once will move the
suspension one position higher from the
current position, assuming all conditions are
met (i.e. engine running, speed below
threshold, etc). The “UP” button can be pushed
multiple times. Each push will raise the
requested level by one position up to a
maximum position of OR2 or the highest
position allowed based on current conditions
(i.e. vehicle speed, etc).
Pushing the “DOWN” button once will move the
suspension one position lower from the current
level, assuming all conditions are met (i.e.
engine running, doors closed, speed below
threshold, etc). The “DOWN” button can be
pressed multiple times. Each push will lower the
requested level by one position down to a
minimum of Park Mode or the lowest position
allowed based on current conditions (i.e.
vehicle speed, etc.)
Automatic height changes will occur based on
vehicle speed and the current vehicle height.
The indicator lamps and instrument cluster
display messages will operate the same for
automatic changes and user requested
changes.
Off-Road 2 (OR2) – Indicator lamps 2, 3, and
4 will be illuminated when the vehicle is in
OR2.
Off-Road 1 (OR1) – Indicator lamps 3 and
4 will be illuminated when the vehicle is in
OR1.
Normal Ride Height (NRH) – Indicator lamp
4 will be illuminated when the vehicle is in
this position.
Entry/Exit Mode – Indicator lamp 5 will be illu-
minated when the vehicle is in Entry/Exit
Mode. If Entry/Exit Mode is requested while
vehicle speed is between 15 mph (24 km/h)
and 25 mph (40 km/h), indicator lamp 4 will
remain on solid and indicator lamp 5 will flash
as the system waits for the vehicle to reduce
speed. If vehicle speed is reduced to, and kept
below, 15 mph (24 km/h) indicator lamp 4 will
turn off and indicator lamp 5 will flash until
Entry/Exit Mode is achieved at which point
indicator lamp 5 will go solid. If during the
height change to Entry/Exit Mode, the vehicle
speed exceeds 15 mph (24 km/h), the
height change will be paused until the vehicle
speed either goes below 15 mph (24 km/h)
and the height change continues to Entry/
Exit Mode, or exceeds 25 mph (40 km/h)
and the vehicle height will return to NRH.
Entry/Exit Mode may be selected while the
vehicle is not moving provided that the
engine is still running and all doors remain
closed.
Transport Mode - No indicator lamps will be
illuminated. Customer driving will disable
Transport Mode.
Tire/Jack Mode - Indicator lamps 2 and 5 will
be illuminated. Customer driving will disable
Tire/Jack Mode.
Wheel Alignment Mode - Indicator lamps
4 and 5 will be illuminated. Customer driving
will disable Wheel Alignment Mode.
21_WK_OM_EN_USC_t.book Page 118
Loading ...
Loading ...
Loading ...