Loading ...
Loading ...
Loading ...
FP (E1.1) 03/2019 page 66/90
In case of impurity of the interior with biological or chemical hazardous goods, there are three possible
procedures depending on the type of contamination and of the charging material.
(1) The drying and heating ovens FP can be hot air sterilized at 190 °C for at least 30 minutes. All
inflammable goods must be removed from the interior before.
(2) Spray the inner chamber with an appropriate disinfectant.
Before start-up, the chamber must be absolute dry and ventilated, because explosive gases may
form during the decontamination process.
(3) If necessary, have strongly contaminated inner chamber parts removed by an engineer for cleaning,
or have them exchanged. Sterilize the inner chamber parts in a sterilizer or autoclave.
In case of eye contact, the disinfectant spray may cause eye damage due to chemical
burns. Follow the operating instructions and safety hints labeled on the bottle of the
disinfectant spray.
Recommended precautions: To protect the eyes use sealed protective goggles.
CAUTION
Eye contact.
Eye damage due to chemical burns.
∅ Do NOT empty into drains.
Wear protective goggles.
After using the disinfectant spray, allow the chamber to dry thoroughly, and aerate it
sufficiently.
16.3 Sending back the chamber to BINDER GmbH
If you send a BINDER product to us for repair or any other reason, we will only accept the product upon
presentation of an authorization number that has previously been issued to you. We will issue an
authorization number (RMA number) after receiving your complaint either in writing or by telephone
prior to your sending the BINDER product back to us. The authorization number will be issued following
receipt of the information mentioned below:
• BINDER product type and serial number
• Date of purchase
• Name and address of the dealer from which you bought the BINDER product
• Exact description of defect or fault
• Your full address; if possible contact person and availability of that person
• Exact location of the BINDER product
• Contamination clearance certificate (chap. 22) via fax in advance
The authorization number needs to be applied to the packaging in such a way that it can be easily
recognized or be recorded clearly in the delivery documents.
For security reasons we cannot accept your delivery if it does not carry an authorization
number.
Return address:
BINDER GmbH
Abteilung Service
Gänsäcker 16
78502 Tuttlingen
Germany
Loading ...
Loading ...
Loading ...