Loading ...
Loading ...
Loading ...
FP (E1.1) 03/2019 page 13/90
2.2 Control panel
(3) (2) (1)
Figure 5: Control panel of standard chamber
(1) Main power switch on/off
(2) Safety device class 2
(3) Program controller RD3
3. Scope of delivery, transportation, storage, and installation
3.1 Unpacking, and checking equipment and scope of delivery
After unpacking, please check the chamber and its optional accessories, if any, based on the delivery
note for completeness and for transportation damage. If transportation damage has occurred, inform the
carrier immediately.
The final tests of the manufacturer may cause traces of the racks on the inner surfaces. This has no
impact on the function and performance of the chamber.
Please remove any transportation protection devices and adhesives in/on the chamber and on the doors
and take out the operating manuals and accessory equipment.
CAUTION
Sliding or tilting the chamber.
Damage to the chamber.
Risk of injury by lifting heavy loads.
∅ Do NOT lift or transport the chamber using the door handle or the door.
∅ Do NOT lift chambers 400 and 720 by hand.
Lift the chamber size 53 and 115 from the pallet at its four lower corners with the aid of
2 people, chamber size 240 with the aid of 4 people
∅ Lift chambers 400 and 720 from the pallet using technical devices (fork lifter). Set the
fork lifter only from the rear in the middle of the chamber. Make sure to place all the
lateral supports of the chamber on the forks.
If you need to return the chamber, please use the original packing and observe the guidelines for safe
lifting and transportation (chap. 3.2).
Loading ...
Loading ...
Loading ...