Loading ...
Loading ...
Loading ...
FP (E1.1) 03/2019 page 38/90
• Tolerance limit range (Tol.band)
Entry of a tolerance limit value in °C. If the actual value of temperature exceeds the set-point of a
program section by more than the entered tolerance limit value, the program is halted (LED (3d)
flashing) until the actual temperature value is again situated within the tolerance range.
Entry of “0” means tolerance limits off.
• Activating or inactivating the week program timer (Prog.Clk)
„Inactive“: The week program timer is turned off (factory setting). The according setting menu (chap.
7) is not visible, as is set-point 2 in fixed value entry mode (chap. 6).
„Active“: The week program timer is activated.
When inactivating the week program timer, any programming remains in the memory and
will be effective again when the week program timer is activated again.
Inactivate the week program timer before entering set-points in fixed value entry mode
(chap. 6). Otherwise, any setting of the operation lines is ineffective.
Inactivate the week program timer before staring a program (chap. 9).
• Display mode (12h/24h)
Select between 12 hours (display “AM” or “PM”) or 24 hours.
• Date of the real time clock (Date)
Main menu. Use the program key to access the settings of year, month, and day in the according
submenus.
• Year of the real time clock (Year)
Enter the year (2006 up to 2050)
• Month of the real time clock (Month)
Enter the month (1 up to 12).
• Day of the real time clock (Day)
Enter the day (1 up to 31).
• Time of the real time clock (Time)
Main menu. Use the program key to access the settings of hour and minute in the according
submenus.
There is no automatic switch between summer time and regular time.
• Hour of the real time clock (Hour)
Enter the hour (0 up to 23).
• Minute of the real time clock (Minute)
Enter the minute (0 up to 59).
Loading ...
Loading ...
Loading ...