Loading ...
Loading ...
Loading ...
Begin installation with the app
1. You must have the latest version of the Wyze app to complete
setup. Download it from the Apple App Store or from Google
Play. If you don’t already have a Wyze account, the app will
ask you to create one and sign in.
2. Tap the plus sign (+) on the upper left corner of the screen on
the app’s home screen.
3. Select Add Device, then Home and Wyze Thermostat to
start the setup guide.
4. The app will show you how to install your thermostat. It will
also ask you some questions about your current thermostat’s
wiring. Answer these questions as accurately as possible.
You’ll get a custom wiring diagram for your system after you’ve
selected your wires.
Step 1. Turn power off
To protect yourself, turn off the switch that controls your
heating/cooling system at the breaker box or use the switch on your
furnace or air handler. If necessary, turn off the main power at the
breaker box. After verifying the power is off, confirm in your app by
tapping Next.
Breaker box switch
Power switch at the furnace
Note: Try changing the temperature on your old thermostat. Wait 5
minutes to make sure that the system does not run.
Step 2. Remove your existing thermostat cover
On most thermostats, you can take off the thermostat cover by
grasping and gently pulling it off. Some thermostats may have screws,
buttons, or clasps to undo. Use the included screwdriver to remove all
the screws or use the button/clasps to remove the cover. You should
have wires that run from your heating/cooling system attached to the
back panel of your old thermostat, and your thermostat’s back panel is
screwed to the wall. Tap Next to confirm.
Note: Do not remove any wires at this step! If you don't see any wires,
you may have a mid-layer that needs to be removed by unscrewing.
6
Loading ...
Loading ...
Loading ...