Loading ...
Loading ...
Loading ...
2. With the wires correctly labelled, remove the wires from the
wire saver.
3. Remove the wires from the control board connected to the
wire saver.
4. Wire the labelled wires to their corresponding terminals on the
control board. Note: You may notice you no longer have a
C-wire. Don't worry, the app will walk you through setting up
the Wyze C-Wire Adapter.
5. Correct the thermostat wires.
At the Thermostat
1. Remove the thermostat cover panel (your wiring should be
similar to the wiring on the above left side photo).
2. To be compatible with Wyze Thermostat, wires K and C will
need to be adjusted.
3. Place the wire in the C terminal into the G terminal.
4. Place the wire in the K terminal into the Y terminal.
Your system is now compatible with Wyze Thermostat, please open
the Wyze app and add a new thermostat. Select the wires currently
connected in your system and the App will guide you through how to
connect the Wyze C-Wire Adapter.
Q: What do I do if I have GH and GC wires terminals at the
control board?
Some systems have GH and GC terminals on the control board with a
jumper wire between R and GH. The GH provides low fan speed
during heating, while the GC is for high fan speed during cooling.
1. Disconnect the wire connected to GH and connect it to R.
2. Disconnect the jumper wire between R and GH.
3. Connect a jumper wire between GH and W.
4. Install the CWA if there is no C-wire at the thermostat.
5. When choosing the type of heating system, choose radiator or
in-floor radiant.
47
Loading ...
Loading ...