Loading ...
Loading ...
Loading ...
Now you can stop your kids (but not your spouse) from accessing the
thermostat. The locking feature is available from both the app and on
the device itself. No passcode needed.
To turn on or off the Lock Thermostat feature in the app:
1. In the Wyze app, tap Wyze Thermostat > Settings.
2. Scroll down to Lock Thermostat and toggle it on/off.
To turn on or off the Lock Thermostat feature on the thermostat;
1. Press the thermostat knob once and then turn the knob
clockwise to the Settings icon.
2. Press the knob again to enter your settings.
3. Turn the knob clockwise again to the Lock icon.
4. Press the knob to lock or unlock the thermostat.
Setting Weekly Schedules
Time-Based scheduling: Program your thermostat for one week; each
day (each day is a different schedule); or any group of days, like
Mon-Fri, Sat, Sun, or Mon-Fri, Sat-Sun. You can further customize the
temperature of a specific time period without changing the rest of the
time slots.
Deleting Schedule
To delete a schedule from your list of schedules, swipe left on that
schedule. A Delete icon will appear. Tap the icon to delete the
schedule.
Auto Switch
When the Auto Switch feature is enabled, we’ll use the motion sensor
in the thermostat and the location of your phone to switch between
Home and Away status. Your thermostat will switch from Home to
Away when your phone is 3 km away from home, or switch from Away
to Home when your phone is within 3 km from home. Once the motion
sensor detects movement in front of the thermostat while the status is
Away, it will switch to Home.
The Auto Switch feature can be toggled on/off in your settings.
Coast to Cool
Wyze Thermostat can send a signal to turn off your compressor or
furnace before the end of a cooling cycle or heating cycle, and keep
the fan on to blow the remaining cool air or warm air into your home.
This feature can help save energy during summer or winter months.
Humidity Preferences
If the * terminal has been connected with an integrated (whole house)
humidifier or dehumidifier, the thermostat can turn the accessory
device on to moderate the humidity level. Go to Settings > Humidity
Preferences to adjust the desired humidity level.
Safety Temps
Safety Temps can help protect your home from extremely cold or hot
weather by turning on your heating or cooling system when your set
limits are reached, even if your thermostat is set to Off or no heating is
scheduled. You will receive a notification when the safety temperature
is reached.
By default, your heating Safety Temp is set to 40°F / 4°C and cooling
is off. But both can be adjusted by going to Settings > Advanced >
Safety Temperature.
For example, when the weather becomes lower than the frost point
when you are away from home, Wyze Thermostat can heat the room
up to prevent low temperatures from damaging your water pipes.
Another good use of this feature is when you have to leave plants or
pets at home. You can set the Safety Temp higher in the winter and
lower in the summer to keep them comfortable during extreme
temperatures.
Note: This feature works without WiFi.
18
Loading ...
Loading ...
Loading ...