Loading ...
Loading ...
Loading ...
Installing the C-Wire Adapter (CWA) when you have extra wires at
the control board
When installing the CWA module for Wyze Thermostat, the CWA will
need to be connected to the control panel. In some situations you will
find the control panel terminals have multiple wires connected as
shown below. The CWA will only need one wire from each terminal
(W-R-Y-G-C), as shown in the image to the right, the Y terminal has
two wires connected to it. To connect the CWA.
1. Identify which wire from terminal will be used for the CWA
1. At the thermostat identify the wire and colour of the
terminal we are looking into, in this case the Y-terminal
at the thermostat has a blue wire.
2. At the control board, the Y-terminal has a blue wire and
a white wire. In this case the blue wire at the control
board will be used for the CWA connection. Label the
blue wire with Y1 label provided in the box for Wyze
Thermostat.
3. Leave the remaining wire connected to the terminal, in
this case when connecting the CWA wires to the
control board, the white wire seen in the control board
will remain.
2. Continue with your CWA installation from the Wyze app.
33
Loading ...
Loading ...
Loading ...