Loading ...
Loading ...
Loading ...
Step 10. Connect the wires to Wyze Thermostat
Push down on the levers to insert the wires into the inner holes of
their corresponding terminals on the wall panel (only one wire per
terminal) until it is firmly in place. Gently tug on each wire to verify
they are securely connected. If you need to release the wires again,
push down on the terminal levers.
Note: Make sure the wires have at least 1/4'' exposed for inserting to
the back panel terminals
Step 11. Attach Wyze Thermostat to the back panel
Push excess wires back into the wall and snap your Wyze Thermostat
into the back panel. After a satisfying "click" sound, your Wyze
Thermostat is ready for setup.
Step 12. Turn on on the power
Go back to the circuit breaker or where you powered off your system
to turn on the power. Wait a moment for the Wyze logo to appear on
your screen. It is now in pairing mode. Follow the app instructions to
personalize your thermostat settings and enjoy！
Installing a thermostat with less common
configurations
3-wire heating-only thermostat system (R, G, W)
For a heat-only system that only contains connections R, G, and W,
The G wire can be repurposed as a C-wire.
1. Identify the G wire at your control board.
2. Remove the G wire from the G terminal on the control board
and connect it to the C terminal at the control board.
3. Connect a jumper wire from the W terminal to the G terminal
on the control board.
10
Loading ...
Loading ...
Loading ...