Loading ...
Loading ...
Loading ...
49-85243-2 35
TROUBLESHOOTING TIPS
Troubleshooting Tips ... Before you schedule service
Problem Possible Cause
Timer Does Not Work The timer cannot be used while the oven is self-cleaning.
Oven Temperature
Too Hot Or Too Cold
Oven thermostat needs adjustment. See the Oven thermostat adjustment section.
Oven Door Will Not
Open After A Clean
Cycle
The oven is too hot. Allow the oven to cool below locking temperature.
“Err Turn Surface
Burners Off” Scrolls
In The Display
Self-clean is in progress and the Cooktop Lockout feature is activated. No surface cooking is
permitted during the self-clean operation. Wait until the self-cleaning operation has been completed.
“Close Door” Scrolls
In The Display
The self-clean cycle has been selected but the door is not closed.
Close the oven door. The
symbol will appear in the display
Is On When You
Want To Cook
The oven door is locked because the temperature inside the oven has not dropped below the
unlocking temperature. Turn the Oven Mode Selector and the Temperature knobs to OFF. Allow the
oven to cool.
F- And A Number
Flash In The Display
The oven has a function error code. Turn the Oven Mode Selector and the Temperature knobs to
OFF. Allow the oven to cool for one hour. Put the oven back into operation.
Disconnect all power to the oven for 30 seconds and then reconnect power. If the function error code
repeats, schedule service.
Display Goes Blank The display is blank when the oven or timer is not in use.
A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit
breaker.
Unable To Get The
Display To Show “Sf”
The TIMER and the MINI-KNOB buttons must be pushed at the same time and held for 4 seconds.
“Probe” Appears In
The Display
This is reminding you to enter a probe temperature after plugging in the probe. Enter a probe
temperature
Shows In Display
The Sabbath mode has been selected.
Power Outage If the oven was in use during a power outage or surge, the oven must be reset. Turn the Temperature
knob and the Oven Mode Selector to OFF. Reset the controls to begin again.
Steam From The Vent When using the convection mode, it is normal to see steam coming out of the oven vent. As the
number of racks or amount of food being cooked increases, the amount of visible steam will increase.
Burning Or Oily Odor
Emitting From The
Vent
This is normal in a new oven and will disappear in time.
Strong Odor This is temporary. An odor from the insulation around the inside of the oven is normal for the first few
times the oven is used.
Fan Noise A cooling fan or a convection fan (depending on the function you are using) may turn on. This is
normal. The cooling fan will turn on to cool internal parts. It may run after the oven is turned off. The
convection fan may cycle on and off until the function is over or the door is opened.
Loading ...
Loading ...
Loading ...