Loading ...
Loading ...
Loading ...
49-85243-2 23
USING THE RANGE: Self-Cleaning Oven
Self-Cleaning Oven
Self-cleaning Safety Precautions
The self-clean oven feature is designed to make
cleaning the inside of the oven easy by using very high
temperatures to burn away food spills.
WARNING
Wipe up excess grease and other food
spills with a damp cloth. Excessive food soils can ignite
leading to smoke and heat damage.
Ŷ Do not clean the oven seals, damage can occur.
Ŷ Remove cookware, broiler pan, grid, probe and any
aluminum foil from the oven.
Ŷ Make sure the oven light lens and lens frame are in place.
Ŷ Do not use commercial oven cleaners, abrasives or
oven protectors in or near the self-cleaning oven.
Ŷ We recommend venting your kitchen with an open
ZLQGRZRUXVLQJDYHQWLODWLRQIDQKRRGGXULQJWKHVHOI
clean cycle.
Ŷ Clean soil from around the frame and from around the
oven door, outside the oven seals. These areas must
be cleaned by hand.
Ŷ The oven racks may be left in the oven during the self-
clean cycle.
IMPORTANT: The health of some birds is extremely
sensitive to the fumes given off during the self-
cleaning cycle of any oven. Move birds to another well-
ventilated room.
NOTE: During the self-clean cycle, the cooktop will
be locked out and not functional. If a surface burner is
turned on after the self-clean cycle has begun, a warning
will be displayed on the Oven Display “err turn surf frnr
off” and a beeping sound will be heard.
NOTE: Self-Clean will not work if the temperature probe
is plugged in or if the Sabbath mode is set.
On double oven models, you can set a clean cycle in
both ovens at the same time. The last oven set will
automatically delay its start until the end of the first
oven’s clean cycle.
On double oven models, you can bake in one oven and
self-clean in the other at the same time. However, you
cannot use the PROOF mode setting in one oven while
the other oven is self-cleaning.
How to Set the Oven for Cleaning
1. Turn off all surface burners. (The CLEAN cycle will not
start until all surface burners have been turned off.)
2. Turn the Oven Mode Selector to CLEAN.
3. Turn the Temperature knob to CLEAN.
The control automatically defaults to the
recommended clean cycle time of 5 hours. The clean
time may be adjusted to any time between 3 and 5
hours using the Mini-Knob. The display will show the
actual time remaining.
4. Push the Mini-Knob to start the CLEAN cycle.
If “CLOSE door” scrolls in the display, the self-clean
cycle has been selected but the door is not closed.
Close the oven door.
The symbol will flash as the oven door is locked. It
will not be possible to open the oven door during the
clean cycle.
5. After the clean cycle is complete and the oven has
cooled, “End” will show in the display and the
will turn off. Turn the Oven Mode Selector and the
Temperature knob to OFF.
To interrupt a clean cycle, turn the Oven Mode
Selector and the Temperature knob to OFF. When the
oven has cooled to a safe temperature, the symbol
will turn off indicating the door may be opened.
An interrupted clean cycle cannot be restarted until
after the oven is cool enough for the door to unlock.
Mini-Knob
Turn to adjust
Push to select
Loading ...
Loading ...
Loading ...