Loading ...
Loading ...
Loading ...
24 49-85243-2
After a Clean Cycle
You may notice some white ash in the oven. Wipe it up
with a damp cloth after the oven cools.
If white spots remain, remove them with warm sudsy
water and rinse thoroughly with a vinegar and water
mixture. These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the
cycle.
Timer
NOTE: The timer is independent of all the other functions
and does not control the oven.
To set the timer:
1. Push the TIMER button.
2. Turn the Mini-Knob to adjust any length of time up to
12 hours and push to select it.
On double oven models, each oven control has its own
timer function. Each timer can be set independently.
The control will beep with 1 minute remaining and the
display will show seconds until the timer counts down to
:00. When the timer reaches :00, the control will beep
3 times followed by one beep every 6 seconds until the
Mini-Knob is pushed.
To cancel the timer:
1. Push the TIMER button.
2. Turn the Mini-Knob to :00 and push to select.
To adjust the timer after start:
1. Push the TIMER button.
2. Turn the Mini-Knob to a new desired time and push
to select.
NOTE: The timer cannot be used while the oven is self-
cleaning. (On double oven models, the timer for the oven
that is not in the self-cleaning mode may be used.)
Self-Cleaning Oven (Cont.)
USING THE RANGE: Self-Cleaning Oven
Mini-Knob
Turn to adjust
Push to select
Loading ...
Loading ...
Loading ...