Loading ...
Loading ...
Loading ...
49-85243-2 15
USING THE RANGE: Oven Racks
Oven Racks
Full Extension Oven Racks
CAUTION
To avoid possible burns, place the
racks in the correct position before turning on the oven.
The correct rack position depends on the kind of food
and the browning desired.
The racks have a frame that locks into the rack supports
on both sides. Once the frame is locked into place,
always pull the rack out, by its upper front rail, to its
full extension stop position, when placing or removing
cookware.
Remove and Replace Oven Racks
To remove a rack:
1. Make sure the rack is pushed all the way into the
oven.
2. Grasp the rack by both its upper front rail and its lower
front rail and lift straight up to unlock the front rack
locks from the rack supports.
3. Firmly holding onto both the upper and lower front rack
rails, pull the rack forward and remove it from the oven.
To replace a rack:
1. Place the rear rack locks over and onto the rack
supports (five rack positions are available including
the top position).
2. Slide the rack all the way in until the rear rack locks
are secure on the rear rack supports and press the
front rack locks onto the front rack supports.
3. Pull the rack all the way out to check that it is properly
engaged.
Low Profile Oven Rack
The low profile oven rack is designed for optimized
performance when baking or broiling certain foods in
your Professional All-Gas range. It can also be used as
a normal oven rack with the full extension oven racks
as well.
Please refer to the oven rack position table for your
EDNHEURLOFRQYHFWLRQPRGHIRUGHWDLOVDVWRORFDWLRQ
and rack type for the best performance.
Lift to unlock front
rack locks from the
rack support
Lower
front
rail
8SSHU
front
rail
Front rack lock
Lower
front
rail
8SSHU
front
rail
Slide the rack all the way
in and push down to lock
the front rack locks onto
the front rack supports
Front
rack
lock
Loading ...
Loading ...
Loading ...