Loading ...
Loading ...
Loading ...
49-85243-2 27
CARE AND CLEANING:2YHQ5DFNV/RZ3URILOH2YHQ5DFN
Oven Racks
Low Profile Oven Rack
The racks may remain in the oven during the self-
cleaning cycle without being damaged.
Periodically, after several self-clean cycles, the oven
racks may need to be lubricated using the Graphite
Lubrication shipped with your range. To order additional
Graphite Lubrication, visit cafeappliances.com.
1. Remove rack from the oven. See the Full extension
oven racks section.
2. Fully extend the rack on a table or countertop.
Newspaper may be placed underneath the rack for
easy cleanup.
3. If there is debris in the slide tracks, wipe it away using
a paper towel. NOTE: Any graphite lubricant wiped
away must be replaced.
4. Shake the graphite lubricant before opening it. Starting
with left slide mechanism of the rack, place four (4)
small drops of lubricant on the two (2) bottom tracks of
the slide close to the bearing carriers.
5. Repeat for the right slide mechanism of the rack.
6. Open and close the rack several times to distribute the
lubricant.
7. Replace the cap on the lubricant and shake it again.
Turn the rack over and repeat steps 3, 4, 5 and 6.
8. Close the rack, turn rack right-side-up and place in the
oven. See the Full extension oven racks section.
9. Repeat above steps for each rack.
NOTE: Do not use a cooking spray or other lubricant
sprays on the slides.
The gray porcelain-coated low profile rack may remain
in the oven during the self-cleaning cycle without being
damaged. It may also be cleaned using a mild abrasive
cleanser. After cleaning, rinse the rack with clean water
and dry with a clean cloth.
Periodically and after clean cycles, the low profile rack
may need to be lubricated to aid sliding. Wipe the
rack edges or oven rack supports with the Graphite
Lubrication shipped with your range or vegetable oil.
To order additional Graphite Lubrication, visit
cafeappliances.com.
Rack right-
side-up
Right side
Left side
Rack right-side-up
Loading ...
Loading ...
Loading ...