Loading ...
Loading ...
Loading ...
Seats and Stowage90
damaged or soiled. Please refer to the guidelines ⇒ page 92, “Luggage
compartment”.
Folding the rear seats back into position
Folding the rear seats back into position
– Install the head restraint in the partially lifted rear seat back-
rest.
– Place the rear lateral seat belt behind the edge of the side
trim panel ⇒ fig. 68.
– Then push the seat backrest back into the upright position
until the locking button clicks into place - check by pulling on
the rear seat backrest.
– Make sure that the red pin is covered ⇒ page 89, fig. 67.
– Fold the rear seats back into its original position.
WARNING
• The belts and the belt locks must be in their original position
after folding back the rear seats and seat backrests - they must be
ready to use.
• The seat backrests must be securely interlocked in position so
that no objects in the luggage compartment can slide into the
passenger compartment if there is sudden braking - risk of injury.
• Pay attention that the rear seat backresst are correctly inter-
locked. It is only then that the three-point seat belt for the middle
seat can reliably fulfil its function.
• Before folding the seat backrest back into the secure position,
place the rear lateral seat belt behind the edge of the side trim
panel. Take suitable measures to prevent that the seat belt is
jammed between the seat backrest and the side trim panel is thus
damaged.
Fig. 68 Lock the seat
backrest
A
C
A
B
s24s
.
book
Page
90
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...