Loading ...
Loading ...
Loading ...
Lights and Visibility 65
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
WARNING
The automatic driving lamp control only operates as a support. The
driver is not released from his responsibility to inspect the light
and if necessary to switch on the light depending on the light
conditions. The light sensor cannot detect for example rain or
snow. Always switch on the low beam under these conditions
as well as when driving in the dark!
Note
• Do not affix any stickers in front of the light sensor, so that you do not
impair its function or put it out of operation.
• The same principles as for using the automatic driving lamp control
also apply to the light which is switched on manually ⇒ page 63.
Fog lights*
Switching on the fog lights
– First of all turn the light switch ⇒ fig. 43 into position
or .
– After this pull the light switch out to the first detent .
When the fog lights are operating, the symbol next to the light switch is
illuminated more intensely.
The rear fog light
Switching on the rear fog light
– First of all turn the light switch ⇒ fig. 43 into position
or .
– Pull the light switch out to the second detent .
The rear fog light warning light ⇒ page 30 lights up in the instrument
cluster when the fog light is switched off.
Only the rear fog light of the trailer lights up automatically when you are
towing a trailer using a factory-fitted towing device which is fitted with
the rear fog light.
The rear fog light is located in the rear light array on the driver's side.
Caution
The rear fog light should only be switched on if visibility is particularly poor
(conform with any varying legal provisions) to avoid dazzling vehicles
behind your vehicle.
Fig. 43 Dash panel:
Light switch
A
1
A
2
s24s
.
book
Page
65
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...