Loading ...
Loading ...
Loading ...
Instruments and Indicator/Warning Lights 29
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
You can change certain settings by means of the information display. The
current setting is shown on the information display in the respective menu
at the top below the line ⇒ page 28, fig. 18.
You can select the following information (depending on the equipment
installed on the vehicle):
• Time
• Winter tyres
• Language
• Units
• Lights & Vision
• Aux. Heating (auxiliary heating)
• Back
After selecting the menu Back you will reach one level higher in the menu.
Setting clock
Here you can set the time, the time format (12 or 24 hour indicator) and
the time change summer/winter time.
Setting for winter tyre speed
Here you can set at which speed a warning signal should sound. These
functions are used for e.g on winter tyres with the permissible maximum
speed less than the maximum speed of the vehicle ⇒ page 266.
When exceeding the speed, the following is displayed on the information
display*:
Speed warning
Language setting
Here you can set in which language the warning and information texts
should be displayed. After selecting the language, e.g. English, the
following is displayed on the information display:
Language: english set
Setting units
Here you can set the units for temperature, consumption and distance
driven.
Setting lights
Here you can switch on or off the function convenience turn signal
⇒ page 68. Furthermore you can set how long the light should stay on for
the function Coming/Leaving Home ⇒ page 66.
After selecting the menu Factory setting the factory setting is established
again.
s24s
.
book
Page
29
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...