Loading ...
Loading ...
Loading ...
Seats and Stowage 101
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
– Hold the cross rod in such a way that the net partition can roll
up slowly and without damage into housing .
– Fold the rear seats back into its original position.
WARNING
• The belt locks and the belts must be in their original position
after folding back the rear seats and seat backrests - they must be
ready to use.
• The seat backrests must be securely interlocked in position so
that no objects in the luggage compartment can slide into the
passenger compartment if there is sudden braking - risk of injury.
• Pay attention that the rear seat backrest is correctly interlocked.
It is only then that the three-point seat belt for the middle seat can
reliably fulfil its function.
• First check for yourself that the cross road is inserted into the
mounts in the front position!
Removing and installing net partition housing
Removing
– Fold the rear seats forwards ⇒ page 89
– Open the right rear door.
– Push the net partition housing ⇒ fig. 88 in the direction of
arrow and take it out of the mounts of the rear seat back-
rests in the direction of the arrow .
Installing
– Position the net partition housing into the mounts of the seat
backrest.
– Push the net partition housing in the opposite direction of
arrow as far as the stop.
– Fold the rear seats back into its original position.
A
B
A
C
Fig. 88 Rear seats: Net
partition housing
A
A
A
1
A
2
A
1
s24s
.
book
Page
101
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...