Loading ...
Loading ...
Loading ...
Unlocking and locking62
– Position the flat blade of a screwdriver carefully against the
rear edge of the cover of the power roof drive ⇒ page 61,
fig. 39.
– Pull the cover down.
– Take the crank handle out of the inside of the cover.
– Press the crank handle fully into the hexagon hole
⇒ page 61, fig. 40.
– Hold the crank pressed and turn it - the roof closes.
– Insert the crank handle into the cover again.
– Press on the cover again by first of all inserting the plastic lugs
and then pushing the cover up.
– Have the fault rectified by a specialist workshop.
Note
It is necessary after each emergency operation (using crank handle) to
move the sliding/tilting roof into the basic position. Here you have to press
the control dial forward to switch position ⇒ page 59, fig. 38 for about
10 seconds.
A
1
A
2
A
A
s24s
.
book
Page
62
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...