Loading ...
Loading ...
Loading ...
Unlocking and locking 57
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
Safety pushbutton*
You can deactivate the buttons for the rear doors using the safety button
⇒ page 56, fig. 36. The buttons for power windows at rear doors are
activated again by pressing the safety pushbutton again.
If the buttons for the rear doors are deactivated, the indicator light in
the safety switch lights up.
WARNING
• If you lock the vehicle from the outside, do not leave any person
in the vehicle since it is no longer possible to open the windows
from the inside in an emergency.
• The system is fitted with a force limiter ⇒ page 58. The closing
process will be stop if an obstruction is detected and the window
will open again. You should nevertheless take particular care when
closing the windows! A person may otherwise suffer severe inju-
ries as a result of getting an arm, for example, jammed in the
window!
• It is recommended to deactivate the electrically operated power
windows in the rear doors (safety pushbutton) ⇒ page 56, fig. 36
when children are being transported on the rear seats.
Note
• After switching the ignition off, it is still possible to open or close the
windows for a further 10 minutes. The automatic window closing will not
operate during this time. The power windows are switched off completely
once you open the driver or front passenger door.
• When driving, use the existing heating, air conditioning and ventilation
system for ventilating the interior of the vehicle. If the windows are
opened, dust and other dirt can get into the vehicle. The wind noise is
more at certain speeds.
Switches in front passenger door and in rear doors
A switch for the relevant window is provided in these doors.
Opening a window
– Lightly press the appropriate switch down and hold it until the
window has moved into the desired position.
– Additionally you can open the window automatically (fully
opened) by pressing the switch down up to the stop.
Renewed pressing of the button causes the window to stop
immediately.
Closing a window
– Lightly press the appropriate switch up and hold it until the
window has moved into the desired position.
A
S
A
S
A
S
A
S
Fig. 37 Position of
switch in front
passenger door
s24s
.
book
Page
57
Thursday
,
November
24
,
2005
12:27
PM
Loading ...
Loading ...
Loading ...