Loading ...
Loading ...
Loading ...
while recording movies.
1. Set the mode dial to M (Manual Exposure).
2. Select the desired aperture value by turning the front dial. Select the desired
shutter speed by turning the rear dial.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to
check the exposure value.
Toward +: Images become brighter.
Toward - : Images become darker.
0: Appropriate exposure analyzed by the product
3. Adjust the focus and shoot the subject.
Note
When [ISO] is set to [ISO AUTO], the ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed
you have set. If the aperture value and shutter speed you have set are not
suitable for appropriate exposure, the ISO value indicator will blink.
The Metered Manual indicator does not appear when [ISO] is set to [ISO
AUTO].
When the amount of ambient light exceeds the metering range of the Metered
Manual, the Metered Manual indicator flashes.
The (SteadyShot warning) indicator does not appear in manual
exposure mode.
The brightness of the image on the monitor may differ from the actual image
being shot.
Hint
By setting the AF/MF/AEL switch lever to AEL and rotating the front/rear dial
while pressing the AEL button, you can change the shutter speed and aperture
(F-value) combination without changing the set exposure value. (Manual shift)
[43] How to Use Shooting Selecting a shooting mode
BULB
Loading ...
Loading ...
Loading ...