Loading ...
Loading ...
Loading ...
When [ AF System] is set to [Phase Detection AF], [Zone] and [Lock-on AF]
under [Focus Area] are unavailable.
When [ AF System] is set to [Phase Detection AF], [Eye AF] is unavailable.
[88] How to Use Using shooting functions Adjusting the exposure
Exposure Comp.
You can adjust the exposure under MENU when the exposure compensation dial
is set to “0.” Based on the exposure value set by auto exposure, you can make the
entire image brighter or darker if you adjust [Exposure Comp.] to the plus side or
minus side, respectively (exposure compensation). Normally, exposure is set
automatically (auto exposure).
1. MENU → (Camera Settings) → [Exposure Comp.] → desired setting.
You can adjust the exposure in a range of –5.0EV to +5.0EV when the
exposure compensation dial is set to “0.”
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use
the flash, you may not be able to get a satisfactory effect.
Only a value between –3.0 EV and +3.0 EV with the equivalent image
brightness appears on the screen when shooting. If you set an exposure
beyond this range, the image brightness on the screen does not show the
effect, but it will be reflected in the recorded image.
When the exposure compensation dial is set to other than “0,” settings for the
exposure compensation dial will be prioritized. For example, if you set
[Exposure Comp.] to +5.0EV, but the exposure compensation dial is set to
+2.0EV, the “+2.0EV” setting will be prioritized.
When you set the exposure compensation dial to “0” from a setting other than
“0,” the exposure value switches to “0” even if the exposure has been set to
other settings.
When you use [Manual Exposure], you can compensate for the exposure only
when [ISO] is set to [ISO AUTO].
Loading ...
Loading ...
Loading ...