Loading ...
Loading ...
Loading ...
[111] How to Use Using shooting functions Correcting the brightness or contrast
Auto HDR
Widens the range (gradation) so that you can record from bright parts to dark parts
with correct brightness (HDR: High Dynamic Range). One image with proper
exposure and one overlaid image are recorded.
1. MENU → (Camera Settings) → [DRO/Auto HDR] → [Auto HDR].
2. Select the desired setting using the left/right side of the control wheel.
Menu item details
Auto HDR: Exposure Diff. Auto (default setting):
Corrects the exposure difference automatically.
Auto HDR: Exposure Diff. 1.0EV ― Auto HDR: Exposure Diff. 6.0EV:
Sets the exposure difference, based on the contrast of the subject. Select the
optimal level between 1.0 EV (weak) and 6.0 EV (strong).
For example, if you set the exposure value to 2.0 EV, three images will be
composed with the following exposure levels: −1.0 EV, correct exposure and +1.0
EV.
Note
[Auto HDR] is not available for RAW images.
When the shooting mode is set to [Intelligent Auto], [Superior Auto], [Sweep
Panorama] or [Scene Selection], you cannot select [Auto HDR].
When [Multi Frame NR] is selected, you cannot select [Auto HDR].
When using [Picture Effect], you cannot select [Auto HDR].
When [Picture Profile] is set to something other than [Off], you cannot set [Auto
HDR].
You cannot start the next shot until the capture process is completed after you
shoot.
You may not obtain the desired effect depending on the luminance difference of
a subject and the shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when product shake or subject blur
occurs, you may not obtain good HDR images. If the product has detected a
Loading ...
Loading ...
Loading ...