Loading ...
Loading ...
Loading ...
(The details are set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off
to the vertical (V) side) to +2 (off to the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper
DETAIL (W). (Type1 (off to the lower DETAIL (B) side) to Type5 (off to the
upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7
(High limit level: unlikely to be limited))
Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep
crispening level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
Copy
Copies the settings of the picture profile to another picture profile number.
MENU →
(Camera Settings) → [Picture Profile] → [Copy]
Reset
Resets the picture profile to the default setting. You cannot reset all picture profile
settings at once.
MENU →
(Camera Settings) → [Picture Profile] → [Reset]
Note
Since the parameters are shared for movie and still images, adjust the value
when you change the shooting mode.
If you print RAW images with shooting settings, the following settings are not
reflected.
Black Level
Black Gamma
Knee
Color Depth
If you change [Gamma], the available ISO value range changes.
There may be more noise in dark parts depending on the gamma settings. It
may improve by setting the lens compensation to [Off].
When using S-Log2 gamma, the noise becomes more noticeable compared to
when using other gammas. If the noise still is significant even after processing
pictures, it may be improved by shooting with a brighter setting. However, the
Loading ...
Loading ...
Loading ...