Loading ...
Loading ...
Loading ...
decreases two images at a time.
This is because the compression rate and the image size after compression
change depending on the image when you shoot a JPEG image.
[347] Troubleshooting Troubleshooting Others
Settings are reset even though resetting operation has
not been performed.
If the battery pack is ejected while the power is set to ON, the camera settings
may be reset. When ejecting the battery pack, first set the power to OFF and
check that the access lamp is not illuminated.
[348] Troubleshooting Troubleshooting Others
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product
is hot, remove the battery pack, and allow it to cool down before trying this
corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power
cord. Connect the power cord and turn on the product again. If the product
repeats the same error often or still does not work after trying these solutions,
consult your Sony dealer or local authorized Sony service facility.
[349] Troubleshooting Troubleshooting Others
“--E-” appears on the screen.
Remove the memory card, and insert it again. If the problem persists even after
Loading ...
Loading ...
Loading ...