Loading ...
Loading ...
Loading ...
Attach the lens hood properly. Otherwise, the lens hood may not have any
effect or may be partially reflected in the image.
When the lens hood is attached properly, the lens hood index (red line)
matches the red index mark on the hood. (There may be no lens hood index on
some lenses.)
Remove the lens hood when using the flash. Otherwise, the lens hood blocks
the flash light and may appear as a shadow on the image.
To store the lens hood after shooting, attach the lens hood to the lens
backward.
[24] How to Use Preparing the camera Attaching a lens
Notes on changing the lens
When changing the lens, if dust or debris gets inside the camera and adheres to
the surface of the image sensor (the part that converts the light to an electric
signal), it may appear as dark spots on the image, depending on the shooting
environment.
Make sure to attach/remove the lens quickly away from dusty locations.
[25] How to Use Preparing the camera Setting the date and time
Setting the date and time
When you turn on the camera for the first time or after you have initialized the
functions, the setting screen for the date and time appears.
1. Set the power switch to ON to turn on the camera.
The setting screen for the date and time appears.
2. Check that [Enter] is selected on the screen, then press on the control
wheel.
3. Select your desired geographic location, and then press .
4. Select a setting item using the up/down side of the control wheel or by turning
Loading ...
Loading ...
Loading ...