Loading ...
Loading ...
Loading ...
the center of the control wheel.
Preset:
Records the newly set time code on the recording medium.
Regenerate:
Reads the last time code for the previous recording from the recording medium
and records the new time code consecutively from the last time code. The time
code advances in [Rec Run] mode regardless of the [TC Run] setting.
[202] How to Use Changing settings Setup menu
Remote Ctrl
You can operate this product and shoot images using the SHUTTER button, 2SEC
button (2 second delay shutter), and START/STOP button (or Movie button (RMT-
DSLR2 only)) on the RMT-DSLR1 Wireless Remote Commander (sold separately)
and RMT-DSLR2 (sold separately). Refer also to the operating instructions for the
Wireless Remote Commander.
1. MENU → (Setup) → [Remote Ctrl] → desired setting.
Menu item details
On:
Allows Wireless Remote Commander operation.
Off (default setting):
Does not allow Wireless Remote Commander operation.
Note
The RMT-DSLR1 Wireless Remote Commander cannot be used for movie
recording.
The lens or lens hood may block the remote sensor that receive the signals.
Use the Wireless Remote Commander in the position from which the signal can
reach the product.
When [Remote Ctrl] is set to [On], the product does not switch to power save
mode. Set [Remote Ctrl] to [Off] after using a Wireless Remote Commander.
Loading ...
Loading ...
Loading ...