Loading ...
Loading ...
Loading ...
173
Network Settings on the Projector
Installation Manual Connecting to a Networ
k
Setting a Network Password
You can set whether or not a password is
required in order to change the projector
network settings.
MENU > [Network Setting] > [Network Pass-
word setting]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [On] is the factory default.
Registering a Network Pass-
word
Register the projector network password.
MENU > [Network Setting] > [Register Network
Password]
When [Register Network Password] is
selected, the window shown below
appears.
Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered using the [ ] / [ ] /
[ ] / [ ] buttons. For the WX6000 /
SX6000, the password can be entered
using a combination of the numerical but-
tons and the [ ] / [ ] / [ ] / [ ] buttons.
[ ] / [1], [ ] / [2], [ ] / [3], and [ ] / [4]
have the same function.
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is [ ] [ ] [ ] [ ]
(WUX5000 / WUX4000) or [1] [1] [1] [1]
(WX6000 / SX6000).
Off A network password is not used.
On A network password is used.
Loading ...
Loading ...
Loading ...