Loading ...
Loading ...
Loading ...
Enable Authencaon Device
Enable the authencaon funcon.
Sub Card Reader Posion
You can select sub card reader posion as dierent or same
side as the main card reader.
Authencaon
Select an authencaon mode according to your actual needs
from the drop-down list.
Recognion Interval
You can set the interval between 2 connuous recognion of a
same person during the authencaon. In the congured
interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can
recognized again.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach
the set value.
Communicaon with Controller Every
When the access control device cannot connect with the card
reader for longer than the set me, the card reader will turn
oine automacally.
Max. Interval When Entering Password
When you entering the password on the card reader, if the
interval between pressing two digits is longer than the set
value, the digits you pressed before will be cleared
automacally.
OK LED Polarity/Error LED Polarity
Set OK LED Polarity/Error LED Polarity of the access control
device according to the card reader parameters. Generally,
adopts the default sengs.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Figure 9-6 Door Parameters Sengs Page
Click Save to save the sengs aer the conguraon.
Door Name
You can create a name for the door.
Open Duraon
65
Loading ...
Loading ...
Loading ...