Loading ...
Loading ...
Loading ...
Set the me zone, the device me and the DST.
Sleeping (s)
Set the device sleeping waing me (minute). When you are
on the inial page and if you set the sleeping me to 30 min,
the device will sleep aer 30 min without any operaon.
Note
If you set the sleeping me to 0, the device will not enter
sleeping mode.
Select Language
Select the language according to actual needs.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Beauty
You can enable the beauty funcon and set the smooth and
the whiten parameter. Tap + or - to control the eect strength.
Note
By default, the funcon is disabled.
7.7 Set Biometric Parameters
You can customize the face parameters to improve the face
recognion performance. The congurable parameters includes
applicaon mode, face liveness level, face recognion distance,
face recognion interval, wide dynamic, face 1:N security level,
face 1:1 security level, ECO sengs, face with mask detecon and
hard hat detecon.
Long tap on the inial page for 3 s and login the home page. Tap
Biometric.
Table 7-1 Face Picture Parameters
Parameter Descripon
Applicaon
Mode
Select either others or indoor according
to actual environment.
Face
Liveness
Level
Aer enabling face an-spoong
funcon, you can set the matching
security level when performing live face
authencaon.
Note
Aer disabling face an-spoong
funcon, there will be spoong
recognion risks.
37
Loading ...
Loading ...
Loading ...