Hikvision DS-K5671-ZV User Manual

Loading ...

4. Select a transmission direcon.

●

Output: A face recognion terminal can connect an external

access controller. And the two devices will transmit the card

No. via Wiegand 26 or Wiegand 34.

●

Input: A face recognion terminal can connect a Wiegand

card reader.

Tap

to save the network parameters.

Note

If you change the external device, and aer you save the device

parameters, the device will reboot automacally.

7.2.5 Set ISUP Parameters

Set ISUP parameters and the device can upload data via ISUP

protocol.

Before You Start

Make sure your device has connect to a network.

Steps

1. Tap Comm. → ISUP .

Figure 7-9 ISUP Sengs

2. Enable the ISUP funcon and set the ISUP server parameters.

ISUP Version

Set the ISUP version according to your actual needs.

Central Group

Enable central group and the data will be uploaded to the

center group.

Main Channel

Support N1 or None.

ISUP

Enable ISUP funcon and the data will be uploaded via ISUP

protocol.

Address Type

Select an address type according to your actual needs.

IP Address

Set the ISUP server's IP address.

Port No.

Set the ISUP server's port No.

Loading ...

Hikvision DS-K5671-ZV Face Recognition Module For Turnstile