Loading ...
Loading ...
Loading ...
The face recognion terminal can connect external access
controller, secure door control unit or card reader via the RS-485
terminal.
Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to
enter the Communicaon Sengs page.
2. On the Communicaon Sengs page, tap RS-485 to enter the
RS-485 tab.
Figure 7-7 Set RS-485 Parameters
3. Select an peripheral type according to your actual needs.
Note
If you select Access Controller: If connect the device to a
terminal via the RS-485 interface, set the RS-485 address as 2.
If you connect the device to a controller, set the RS-485
address according to the door No.
4. Tap the back icon at the upper le corner and you should
reboot the device if you change the parameters.
7.2.4 Set Wiegand Parameters
You can set the Wiegand transmission direcon.
Steps
1. Tap Comm. (Communicaon Sengs) on the Home page to
enter the Communicaon Sengs page.
2. On the Communicaon Sengs page, tap Wiegand to enter
the Wiegand tab.
Figure 7-8 Wiegand Sengs
3. Enable the Wiegand funcon.
27
Loading ...
Loading ...
Loading ...