Loading ...
Loading ...
Loading ...
Figure 6-3 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2. Tap Next.
Wired Network
Note
Make sure the device has connected to a network.
If enable DHCP, the system will assign the IP address and
other parameters automacally.
If disable DHCP, you should set the IP address, the subnet
mask, and the gateway.
Note
IP address of 192.168.1.64, and 192.168.1.7 are not
suggested to use.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get
connected.
Or tap Add Wi-Fi and enter the Wi-Fi's name and the
password to get connected.
3. Oponal: Tap Skip to skip network sengs.
6.4 Access to Plaorm
Enable the funcon and the device can communicate via Hik-
Connect. You can add the device to Hik-Connect mobile client and
so on.
Steps
Note
Parts of the device models supports funcon. Refers to the actual
device for details.
1. Enable Access to Hik-Connect, and set the server IP and
vericaon code.
19
Loading ...
Loading ...
Loading ...