Loading ...
Loading ...
Loading ...
Note
The funcons vary according to dierent models. Refers to the
actual device for details.
Set Audio Parameters
Click Conguraon → Video/Audio → Audio .
Set the audio stream type, input volume, and output volume.
Check Enable Voice Prompt according to your needs.
9.6.9 Set Image Parameters
You can adjust the image parameters, video parameters,
supplement light parameters, beauty parameters, enable WDR
and set capture interval.
Steps
1. Click Conguraon → Image .
2. Congure the parameters to adjust the image.
Image Adjustment
Drag the block or enter the value to adjust the live video's
brightness, contrast, saturaon, and sharpness.
Video Adjustment (Video Standard)
Set the video frame rate when performing live view
remotely. Aer changing the standard, you should reboot
the device to take eect.
PAL
25 frames per second. Suitable for mainland China, Hong
Kong (China), the Middle East countries, Europe countries,
etc.
NTSC
30 frames per second. Suitable for the USA, Canada,
Japan, Taiwan (China), Korea, the Philippines, etc.
Supplement Light
Set the supplement light type, mode, start me and end
me. You can also set the brightness.
Beauty
Set whiten and smooth value for the face appeared on the
device live view page.
Backlight
Enable or disable WDR.
When there are both very bright and very dark areas
simultaneously in the view, WDR balances the brightness
level of the whole image and provide clear images with
details.
Start All Recording
You can click
to record when starng live view.
Capture Interval
You can click
to capture image when starng live view.
Full Screen
You can click
for full screen view.
63
Loading ...
Loading ...
Loading ...