Hikvision DS-K5671-ZV User Manual

Loading ...

Figure 9-3 DST Page

2. Check Enable DST.

3. Set the DST start me, end me and bias me.

4. Click Save to save the sengs.

9.6.5 Change Administrator's Password

Steps

1. Click Conguraon → System → User Management .

Click

3. Enter the old password and create a new password.

4. Conrm the new password.

5. Click Save.

Cauon

The password strength of the device can be automacally

checked. We highly recommend you change the password of

your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers,

lower case leers, numbers, and special characters) in order to

increase the security of your product. And we recommend you

change your password regularly, especially in the high security

system, changing the password monthly or weekly can beer

protect your product.

Proper conguraon of all passwords and other security

sengs is the responsibility of the installer and/or end-user.

9.6.6 View Device Arming/Disarming Informaon

View device arming type and arming IP address.

Click Conguraon → System → User Management → Arming/

Disarming Informaon .

You can view the device arming/disarming informaon. Click

Refresh to refresh the page.

9.6.7 Network Sengs

Set TCP/IP, port, Wi-Fi parameters, ISUP, and plaorm access.

Note

Some device models do not support Wi-Fi or mobile data sengs.

Refer to the actual products when conguraon.

Set Basic Network Parameters

Click Conguraon → Network → Network Sengs → TCP/IP .

Loading ...

Hikvision DS-K5671-ZV Face Recognition Module For Turnstile