Loading ...
Loading ...
Loading ...
Parts and Controls
7.3 Accessories 7
7-3
Power Switch – The power switch is located on the power entry module (PEM).
The PEM also houses the fuses and the dual voltage selector. The PEM allows
the unit to be field switchable for 115 VAC ( ±10 %) or 230 VAC ( ±10 %)
operation.
Serial Port – A DB-9 male connector is present for interfacing the calibrator to a
computer or terminal with serial RS-232 communications.
Fan – The fan inside the calibrator runs continuously when the unit is being
operated to provide cooling for the instrument. Slots at the top and around the
two corners of the calibrator are provided for airflow. The area around the
calibrator must be kept clear to allow adequate ventilation. The airflow is directed
out the back.
7.3 Accessories
7.3.1 Transport/Pour Access Lid
A transport/pour access lid (Figure 3) is provided so the fluid being does not have
to be removed when transporting. The lid doubles as a pour spout.
Figure 3. Bath Lids and Lid Parts
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...