Loading ...
Loading ...
Loading ...
Before You Start
1.3 Authorized Service Centers1
1-5
• DO NOT operate this instrument in an excessively wet, oily,
dusty, or dirty environment.
• The unit is a precision instrument. Although it has been
designed for optimum durability and trouble free operation,
it must be handled with care.
• Most probes have handle temperature limits. Be sure that
the probe handle temperature limit is not exceeded in the air
above the instrument.
• The instrument and any thermometer probes used with it
are sensitive instruments that can be easily damaged.
Always handle these devices with care. Do not allow them
to be dropped, struck, stressed, or overheated.
• When calibrating PRTs always follow correct calibration
procedure and calibrate from high temperatures to low
temperatures with the appropriate triple point of water
checks.
• Components and heater lifetimes can be shortened by
continuous high temperature operation.
• If a mains supply power fluctuation occurs, immediately
turn off the bath. Power bumps from brown-outs and black-
outs can damage the instrument. Wait until the power has
stabilized before re-energizing the bath.
• Fluids may expand at different rates. Allow for fluid
expansion inside the well as the instrument heats.
Otherwise, the fluid may overflow the well and leak into the
instrument.
1.3 Authorized Service Centers
Please contact one of the following authorized Service Centers to coordinate
service on your Hart product:
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...