Loading ...
Loading ...
Loading ...
RIGOL Chapter 20 System Utility Function Setting
20-14 MSO5000 User Guide
âš« Data Source
Press Data Source continuously to select "Memory" or "Screen" as the
source of the saved waveform.
âš« Format
Press Format and then rotate the multifunction knob to select the
waveform format. Press down the knob to select it. You can also press
Format continuously to select or enable the touch screen to tap the format.
The format types include "*.bin" and "*.csv".
âš« Storage Channel
If "Memory" is selected under Data Source, you need to set the storage
channel. Press Channel and then rotate the multifunction knob to select
the storage channel. You can also press Channel continuously to select the
channel or enable the touch screen to tap the desired channel. The available
storage channels include CH1-CH4 and D0-D15.
3. Setup Saving
When the Quick shortcut key is set to "Save Setup", press Quick on the front
panel to save the setup of the oscilloscope.
Press Operation and then rotate the multifunction knob to select "Save
Setup". Press down the knob to select it. You can also press Operation
continuously to select among the options, or enable the touch screen to tap the
desired operation type. You do not need to set relevant parameters.
4. All Measurement
When the Quick shortcut key is set to "All Measure", press Quick on the front
panel to measure all the parameters of the current measurement source.
âš« Operation Type
Press Operation and then rotate the multifunction knob to select "All
Measure". Press down the knob to select it. You can also press Operation
continuously to select among the options, or enable the touch screen to tap
the desired operation type.
âš« All Measurement
Press All Measure, then rotate the multifunction knob to select the
desired measurement channel. You can also press All Measure continuously
to select or enable the touch screen to tap the desired channel. The available
measurement channels include OFF and CH1-CH4.
5. Statistics Reset
When the Quick shortcut key is set to "Stat Reset", press Quick on the front
panel to make statistics reset of measurement or pass/fail test reset.
Loading ...
Loading ...
Loading ...