Loading ...
Loading ...
Loading ...
Figure 10-6 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule sengs, see Set Arming Schedule . For the linkage method sengs, see
Linkage Method Sengs .
7.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with the models.
10.3.7 Set Loitering Detecon
It detects whether there is any target loitering in a predened area. If the me that the target
loiters in the set region reaches the set threshold, the device can take linkage acons.
Before You Start
●
Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.
●
For the device supporng HEOP, go to VCA to import and enable Smart Event.
Steps
1.
Go to VCA → Set Applicaon → Smart Event → Loitering Detecon .
2.
Check Enable.
3.
Click Add to add a rule and set a detecon area.
1) Draw a detecon area. Click
, click on the live view to specify the vertexes and draw the
boundaries of the detecon area, and right click to complete drawing.
Network Camera User Manual
86
Loading ...
Loading ...
Loading ...