Loading ...
Loading ...
Loading ...
Note
●
Up to 8 areas can be set at the same me.
●
Try not to overlap the areas.
4.
Set rule parameters.
Alarm Interval
During the set alarm interval, alarms of the same type only trigger one nocaon.
People Number OSD
It displays the number of people in the live view window.
5.
Select Waing Time Detecon and set Alarm Trigger Condion and Alarm Threshold.
When the waing me in the set area reaches alarm threshold and triggering condion, an
alarm will be triggered.
6.
Click Save.
Note
You can set the parameters of mulple areas by repeang the above steps.
7.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
Note
Select the rule in the rule list, and click or click Copy to... to copy the related arming schedule
and linkage method sengs to the other rules.
8.
Oponal: Click Data Upload to set data uploading. Both real-me uploading and scheduled
uploading are supported. Click Save aer nishing the sengs.
Real-Time Uploading
Check Real-Time Upload and the device uploads the detected target ID, waing duraon, and
regional people number in real-me.
Scheduled Uploading
The device uploads the people number whose waing duraon is equal to or larger than the
Min. Duraon of Stay at the integral point.
For example, if the min. duraon of stay is set as 10 sec and two areas are covered, the
device, at the integral point, will upload the people number when the duraon of stay is
equal to or longer than 10 sec in two areas respecvely.
9.
Oponal: Set text overlay. For detailed sengs, refer to
Overlay and Capture .
10.
Oponal: View version and set ltering condion. For detailed sengs, refer to Advanced
Sengs .
What to do next
Go to Applicaon Display → Queue Management Stascs to view detailed data analysis. For
detailed sengs, refer to Queue Management Stascs .
Network Camera User Manual
102
Loading ...
Loading ...
Loading ...